125cc Atv Engine

7 ways to extend the use of the motorcycle Age

When you but see an ATV for sale , or motorcycle, after spending lots of money for it, what next? How to use it for long.
Every driver hopes to expand the motorcycle or motor scooter with age. Motorcycle age from estimated by kilometers when motorcycle is totally repaired.
China ATV or bike age is 50 000 100 miles km according to the form, the use of the motorcycle.
In that means, how to use the motorcycle to have great influence on the age of the motorcycle.
What is the sign for the total repair? An important sign is the piston and cylinder abrasion. abrasion of the cylinder is a key signal. When the abrasive cylinder, space between the piston and the cylinder becomes larger, and makes noises and leak. The fuel increase this quickly, and the inefficiency of unit. It's time to repair total.
Total compensation includes adjusting piston-cylinder space and change the piston. Chinese ATV piston-cylinder space is 0.05 mm to 0.07mm. Up important is how to prevent abrasion of the cylinder. Now we are discussing what to do to prevent abrasion of the cylinder.
1. A good warm-up for new bike
For example, when you buy a new 125cc motorcycle, though new motorcycle piston and cylinder are lucent, but it's time to take a harsh look carefully. The of the oil is easy hurt when it endured heavy power, and make cylinder been Demag.
So when you are using new motorcycle, you have to take a low speed until cylinder part is the massage oil. You can extend the age of the cylinder in this way has been demonstrated by the scientist.
When a new motorcycle that done, the user works required to have training unit that is about 1 kilometers 2 kilometers. During the preparation unit, elements factory installed to limit driving speed. It is best not to drive other people carry. For 2-stroke motorcycle, gasoline lubricants should be up to 20:1 ratio which is the best relationship for the new motorcycle.
2. Clean air in the cylinder
If the air enters through air filter includes a bit of dust, improve abrasion cylinder. So we must maintain very clean air in the cylinder. China now uses bike cleaner air, we must clean the dust for every 1000 miles. On the other hand, we must always check the air filter seal preventing air from entering the cylinder directly.
3. Cylinder needs a good lubricant
wear of liquid is better than dry wear. To prevent dry wear, use lubricant to keep the cylinder and piston smoothly to build wear liquid. Required lubricant to be viscous. Lubricant Viscosity refers to the temperature, we use different lubricant according to the different season.
Due to the international standard Summer is the lubricant of API grade SAE10W/30 SD class. According to the rule of China, No.6 lubricant is used for winter, n º 10 for spring and autumn, No. 15 for the summer.
In addition, you should always check the pressure gauge lubricant and staff in order to not use a motorcycle without enough lubricant.
4. Motor function flexibly
The main reason for the movement of the explosion of the gasoline engine burns quickly. Burst wave generates a strong pulse and stir the result of abrasion in the bottle in the bottle.
The reason for the fast-burning gasoline is as follows:
Gasoline is not suitable for engine compression ratio.
According to the standard motorcycle, motor high compression ratio use petrol 93 #, and low compression ratio using the gasoline engine 90 #. If you are wearing cylinder engine uses high compression ratio 90 # gasoline.
Crank the engine speed is between maximum torque and maximum power. Chinese motorcycle is to 5000r/min 3000r/min. Each team has its speed range.
If units do not change gear in time and accelerate the motorcycle, it will make tremors noise in the cylinder.
5. Avoid mucus cylinder
mucus is mucus cylinder between piston and cylinder. The reason for this are lacking of lubricant or lubricant does not work because the problem of cold engine. How to prevent the fire engine?
On the one hand, we always clean the heatsink and make it work better disperse heat. On the other hand we must pay attention to the temperature of the scattering.
The normal temperature is less than 180 degrees, and we can check the thermometer. Driver also can test the temperature by crocodiles. When the saliva makes the noise like scattering zizi ~ ~ ~, which means high temperature dispersant. We have to stop driving and cool the bike.
Driving in a cool temperature can prevent mucus cylinder.
Also, when you discover the driving speed is falling after the acceleration, should stop driving immediately.
Because it is under the auspices of mucus cylinder. After the engine cools, download the piston and piston polishing surface adhere to the cylinder by sandpaper.
Only in this way we save the cylinder, otherwise broken cylinder.

6. Avoid the use of the motorcycle when it cold.
Lubricant is frozen and does not work in winter. Then you should warm up the motorcycle. The method is running the engine before driving. Lubricant work after heating.
7. Prevent the fall of coal in the cylinder.
There is some coal in the top of the piston and the cylinder head. Coal cylinder hurt when he falls into the cylinder.
In order to reduce carbon, we need to use lubricant professional.
Driver also needed to clean coal on the piston, charcoal too will burn smaller space and increase the compression ratio result in the movement to explode.
My friends, if you can do what you mention your bike will have a long age.

Article Source: ATV for sale All rights reserved

About the Author

Koma Wu is director of utility trailer. You can get the latest information and products about ATV winch and ATV parts.

110cc ATV with a Lifan 125cc Racing engine on it